Thanks for choosing Allkind. This guide covers sealing, storage and Low-E glass care. If you need a hand, our team is happy to help.
Sealing
Raw (unsealed) joinery
- Seal or prime within 24 hours of delivery.
- After the first sealer coat, fill marks and nail holes with a colour-matched filler.
Pre-sealed or pre-primed
- Polished finish: Use a timber sealer (not just stain); light sand and add a clear coat annually.
- Painted finish: Follow your paint supplier’s advice for priming and finishing.
Dark colours attract more heat and may affect warranty, check with us before choosing dark tones.
Storage
- Store joinery flat, off the ground, in a dry, shaded area.
- Avoid wet or newly plastered areas and places with large temperature swings.
- Do not overload or stack heavy items on top of joinery.
Low-E Glass Care
Clean the outside like standard glass. The inside has a delicate coating—follow the steps below.
Avoid
- Abrasive, ammonia-based, alcohol-based, powder, alkali or acid cleaners
- Scrapers, blades, squeegees or metal tools
Do
- Spray plain water generously from top to bottom to lift dust.
- Use soapy water (dish detergent) or a 10:1 water:vinegar mix for stubborn spots.
- Rinse with clean water and remove excess with a lint-free cloth.
- Tip: leave a very thin moisture film to air-dry for fewer streaks.
Hardware and Associated Products
Some hardware and accessories supplied or installed with your joinery may have specific care and maintenance requirements. Product Care Guides for these items are typically provided at the time of delivery or collection. If you need an additional copy, feel free to reach out to our team, we’re happy to help.
Need help?
Questions about care or finishes? Get in touch.
- Phone: (+61) 7 3359 3025
- Email: [email protected]
Download full warranty & care document
Keep your joinery looking its best—get the full warranty and care guide in one handy file.
